Overview: Corrosion horizontal heat pump is a single suction, multistage, segmental corrosion-resistant centrifugal pump for conveying solid particles of corrosion-resistant liquid. Transmission medium temperature -20 ℃ ~ 105 ℃, allowing inlet pressure is 0.6MPa. Parameters: Flow rate Q 46m3 / h Head H 250m Model Description: DF46-50 × 5 "DF" - indicates corrosion-resistant multi-stage centrifugal pump. "46" - said the pump flow rate (m3 / h). "50" - which means that single-stage pump head (m). "5" - said the series. Structure type: Corrosion horizontal heat pump for horizontal mounting. In addition DF155-30-type pump inlet is horizontal, the rest of the pump suction vertical. All DF-type pump discharge vertically upward direction. Commonly used seal packing seal, according to user needs can be mechanical seal. In addition DF85-67-type pump with sliding bearing lubrication, DF155-67-type pump with rolling bearing lubrication, the rest of Rolling grease. Pump to force except DF3-40 Ⅱ type pump with impeller arranged symmetrically balanced way, the rest are used to balance the balance disc mechanism. Direction of rotation: horizontal heat pump corrosion shifted from side to see the original motivation for the clockwise rotation. Main parts: corrosion-resistant horizontal heat pump wetted parts materials are steel and cast stainless steel types, order should be based on the name of the transmission medium, concentration, inlet pressure, temperature, corrosion of the material, a reasonable choice pump material, type and structure of the pump seal. Complete range: pump and motor, the base supporting the supply can be equipped with common base or base, the factory also provides attachments (including spit taper pipe, valve, check valve) and spare parts (including the impeller, seal rings, guide vane sets, balance disc and sleeve).